If you are looking for a smart thermostat that can be integrated with Alexa and comes with a responsive touchscreen interface, then the Amazon Smart Thermostat is an excellent choice for you. At only $60, this smart thermostat is a steal and provides incredible value for money. In this article, we will discuss the installation process of the Amazon Smart Thermostat and its benefits.
Why Choose Amazon Smart Thermostat?
If you’re looking for a reliable and efficient smart thermostat, Amazon Smart Thermostat is an excellent choice. Here are some of the reasons why:
One of the most attractive features of Amazon Smart Thermostat is its price. At just $60, it’s a steal compared to other brands with similar capabilities.
Seamless Alexa Integration
Amazon Smart Thermostat seamlessly integrates with the Alexa app and Alexa voice commands. You can easily control your thermostat using your voice or through the Alexa app.
The Amazon Smart Thermostat boasts an attractive design that will blend in seamlessly with any home décor. It has a sleek and modern look that will complement any room.
Responsive Touchscreen Interface
The Amazon Smart Thermostat has a responsive touchscreen interface that makes it easy to adjust the temperature and other settings. The interface is user-friendly and intuitive, so you’ll have no trouble getting the hang of it.
Required Tools and Preparation
If you’re planning to install an Amazon Smart Thermostat, there are a few tools and tips you should keep in mind beforehand. Here’s a list of necessary tools and preparation tips:
- Tape measure
- Ladder (if your thermostat is high up on the wall)
- Before installation, make sure to turn off the power to your heating and cooling system by shutting off the circuit breaker or removing the fuse that provides power to the HVAC equipment.
- Check the compatibility of your heating and cooling system with the Amazon Smart Thermostat to ensure that it will work properly.
- Be sure to have a stable Wi-Fi network available to connect your thermostat to.
- Read the installation guidelines carefully and plan the route from the door to your equipment site to ensure a smooth installation process.
Shut Off Power to the HVAC System
Before installing your Amazon Smart Thermostat, it’s important to shut off the power to the HVAC system. This will prevent any potential electrical hazards and keep both you and your home safe during the installation process. Below is a step-by-step guide on how to shut off the power properly:
- Locate the electrical panel in your home. This is usually located in a utility room or basement.
- Open the panel door and locate the circuit that controls your heating and cooling system.
- Flip the lever to the “off” position.
- Test the device to make sure the power is off before working on it.
By following these steps, you can make sure that your installation process is smooth and safe. Turn the power back on once the installation is complete, and enjoy your new smart thermostat.
Remove Old Thermostat
Before installing the Amazon Smart Thermostat, it is important to remove the old thermostat. Here is a step-by-step guide on how to do it:
- Turn off the power to the thermostat at the circuit-breaker box of your home.
- Take the housing off of the old thermostat.
- Remove the screws that are holding the thermostat to the wall and gently pull the thermostat away from the wall to expose the wires.
- Examine where the wires are connected to the thermostat’s terminal screws.
Make sure to label the wires to know where to connect them to the new thermostat later. Once the old thermostat is removed, you can proceed with the installation of the Amazon Smart Thermostat.
Connect Wires: Wiring Guide for Amazon Smart Thermostat Installation
Before starting with the wiring process, it’s important to turn off power to the thermostat by tripping the circuit breaker. Next, remove the cover plate from the old thermostat and examine the wires.
Generally, the wires will be color-coded and marked with letters indicating their function. For instance, the Y wire controls the air conditioner, the G controls the fan, the W controls the heating system, and the Rc or Rh wire is for the power supply. The C wire is for common, and it is generally found in newer HVAC systems.
Amazon Smart Thermostat comes with a C-wire adapter, which allows for more flexible compatibility with various types of HVAC systems. After identifying the wires and their functions, connect them to the corresponding terminal screw on the thermostat.
It’s essential to ensure that the wires are stripped, straightened, and secured tightly around the screws. Remember to match the wire colors to the labels on the thermostat. Use a voltage tester after wiring to make sure no electrical currents are present, and the system is not live.
Lastly, power up the thermostat by turning on the circuit breaker, and check if the cooling and heating system is running properly.
Connect Amazon Smart Thermostat to Wi-Fi
Connecting Amazon Smart Thermostat to Wi-Fi is easy and straightforward. Follow these simple steps to connect and control your thermostat remotely:
- Make sure your Wi-Fi network is compatible with the Amazon Smart Thermostat. Note that it only connects to 2.4GHz Wi-Fi networks.
- Go to the Alexa app and select your device. Then, select “Devices” and choose your thermostat.
- Click on “Wi-Fi Network” and select your network from the list of available networks. Enter your Wi-Fi password when prompted.
- Once the connection is established, you can use Alexa voice commands or the Alexa app to control your thermostat remotely.
Set Up and Test Amazon Smart Thermostat
If you’re interested in setting up your Amazon Smart Thermostat and testing it after installation, follow these simple steps:
Step 1: Plan your installation
Before proceeding with the installation, ensure that you plan the route from the door to the equipment site. Determine what equipment, technicians, and items need to be removed from the route. Consider how to keep all electrical hookups accessible while the equipment is placed, and make sure to perform leveling and stability checks during placement. Finally, allocate enough time to test the device fully once it’s installed.
Step 2: Turn off power to the old thermostat
Before removing the old thermostat, turn off the power to it at the circuit-breaker box in your home. Then, remove the housing from the old thermostat and use a screwdriver to remove the screws that are holding it to the wall. Gently pull the thermostat away from the wall to expose the wires, and take note of which wires are connected to which terminal screws.
Step 3: Install the Amazon Smart Thermostat
Open the Alexa app on your mobile device and select “Add a Device” in the “More” section. Under the “All Devices” category, choose “Thermostat” and select “Amazon” as the brand. If you haven’t already installed the thermostat, select “No” to receive guided instructions in the app for connecting the wiring and installing the thermostat.
Step 4: Connect to Wi-Fi
When pairing the thermostat to Wi-Fi, keep in mind that it only connects to 2.4GHz Wi-Fi networks, not 5GHz bands. If you’re having trouble connecting to Wi-Fi, you can contact Amazon Home Services to install the thermostat for you.
Step 5: Test the Amazon Smart Thermostat
To ensure that everything is working correctly, use the Alexa app to test the Amazon Smart Thermostat. The app allows you to set the temperature and turn the device on and off. If you experience any difficulties or issues, refer to Amazon’s troubleshooting guide or contact their customer support team for assistance.
Troubleshooting Common Problems with Amazon Smart Thermostat
Installing the Amazon Smart Thermostat can be done by anyone with basic DIY skills; however, it is not uncommon to encounter some problems. Here are some of the most common issues that users face during installation and how to troubleshoot them:
Thermostat Not Powering On
If the thermostat is not turning on, it could be due to a few things. Start by checking that the circuit breaker is on, and that the wiring is correctly connected. Ensure that the wiring is secured tightly and that there are no exposed wires. If the issue persists, try resetting the thermostat by holding down the power button for 10-15 seconds.
If you are having trouble pairing the thermostat to Wi-Fi, ensure that your device is running on a 2.4GHz network. The thermostat is not compatible with 5GHz networks. Also, check that you have entered the correct password for your Wi-Fi network. Finally, check that your Wi-Fi signal is strong and that the thermostat is within range of the router.
The Amazon Smart Thermostat comes with a clear installation guide that you should adhere to. If the wiring has been done incorrectly, it can cause the thermostat to malfunction. Ensure that each wire is connected to the appropriate terminal screw and that there are no loose wires. Also, ensure that the wiring matches the lettering on the thermostat (R with R, W with W, Y with Y, G with G).
Before purchasing the thermostat, check that it is compatible with your heating and cooling system. If the thermostat is not compatible, it will not work as expected. If you are unsure, consult a professional HVAC technician who can recommend a compatible thermostat.
Additional Features and Tips
Aside from the basic installation and setup of the Amazon Smart Thermostat, there are additional features and tips that users can take advantage of to maximize its use. One of its standout features is its seamless integration with the Alexa app, allowing users to easily control the thermostat through Alexa voice commands. Its attractive design and responsive touchscreen interface also add to its ease of use.
Users can also take advantage of the thermostat’s energy-saving capabilities by shifting the time of day they use the most energy to when market rates are low, maximizing savings. It’s important to note that the Smart Thermostat can only be connected to 2.4GHz Wi-Fi networks, not compatible with 5GHz bands. In case of difficulty in connecting with Wi-Fi, users can opt for Amazon Home Services team to install the thermostat for them.
When it comes to maintenance, users must take note of the proper way to shut off and turn on the power to the device. The device has a lever to turn off the power, and it’s important to test it to ensure that the power is off before working on it. During installation, it’s essential to plan the route from the door to the equipment site, equipment, technicians and items to remove from the path to keep all electrical hookups accessible while equipment is placed, and leveling and stability checks during placement. The device also needs time for operation testing once fully installed.
With these additional features and tips, users can definitely take advantage of Amazon Smart Thermostat’s capabilities, making it a smart investment for home automation and energy efficiency.
In conclusion, the Amazon Smart Thermostat is an excellent choice for those looking for a cost-effective and easy-to-install solution for home temperature control. With its seamless integration with the Alexa app and Alexa voice commands, along with its responsive touchscreen interface, the Amazon Smart Thermostat provides a hassle-free user experience. Furthermore, the installation process can be completed with ease using the guided instructions provided by the Alexa app. Overall, the Amazon Smart Thermostat is an excellent addition to any home seeking a smart and energy-efficient thermostat.
All About the Amazon Smart Thermostat
Installation Help with Amazon Smart Thermostat
If you’re looking for an affordable smart thermostat for your home, the Amazon Smart Thermostat is a great option. It not only comes at an excellent price point, but it also seamlessly integrates with the Alexa app and Alexa voice commands, making it easy to adjust the temperature of your home. Its attractive design and responsive touchscreen interface make it a sleek and modern addition to any household.
When it comes to installing your Amazon Smart Thermostat, make sure you plan accordingly. Before you start the process, consider the route from the door to the equipment site and the items you’ll need to remove from the path. It’s also important to ensure that all electrical hookups remain accessible while the equipment is placed and to perform leveling and stability checks during placement. Once installed, make sure to allow time for operation testing to ensure everything is running smoothly.
When pairing your Amazon Smart Thermostat to Wi-Fi, keep in mind that it can only be connected to 2.4GHz Wi-Fi networks and is not compatible with 5GHz bands. If you’re having trouble getting your thermostat connected, Amazon Home Services offers installation assistance for your convenience.
The Amazon Smart Thermostat is an ENERGY STAR certified device, meaning it automatically adjusts heating and cooling temperature settings in your home for optimal performance. Independent certification confirms that Smart thermostats that earn the ENERGY STAR label deliver energy savings based on actual field data. Upgrade to a smart thermostat for an eco-friendlier and more energy-efficient option.
If you’re interested in other smart thermostat options, the Ecobee4 Smart Thermostat and the Nest Thermostat E are both highly regarded devices in the market. The Ecobee4 has a built-in Amazon Alexa and room sensors that detect temperature and occupancy, while the Nest Thermostat E is energy efficient and sleek in design.